Stay in the field. Wave as the other pumps roll by. They’re burning daylight. You’re making money using the best bypass oil filter in fracking.
Currently, your hydraulic fracturing pump is down every 300 hours or 12.5 days for an oil change. Factor in transport time and cost of labor plus oil replacement – you’re burning daylight and profit. The pressure is on to get that pump back in the field, pronto.
The FS-2500 relieves that pressure, brilliantly.
SEE HOW THE FS-2500 WORKS
MAKE MONEY SAVING TIME
Keep your pumps at the well head for 2500 hours. 104 days in the field. Install the FS-2500, the world’s most efficient and compact bypass oil filter, on your pumps and keep them in the field for 104 days straight. When time comes for an oil change, it’s done on site in about 25 minutes with the FS-2500.
The goal is to frack oil, not spend money replacing it in your pumps’ engines at 60 gallons a pop. The FS-2500 keeps your pumps’ engine oil so clean that you change the filter every 75 days, not necessarily the oil. Send it in for testing. You’ll know when it actually requires draining. The numbers don’t lie.
CALCULATE SAVINGS
MICRONS MATTER
The FS-2500 bypass oil filter offers 98% efficiency at 1 micron. Regular oil filters capture 30 to 40 microns, but it’s the soot and grime at 2 to 7 microns that cause engine damage.
Independent test results show the oil tested after a drain using the FS-2500 is chemically identical to when it went into the engine. In other words, it’s like virgin oil. You can put those numbers in your wallet.
